CZ-52 Firing Pin & Bulgarian 54R Range Report

February 26th, 2007

I took the CZ-52 and some Romanian 7.62×25 to the range to test out the new firing pin. The last trip to the range with the CZ-52 didn’t go well, I had the original pin installed and the trigger felt like a 10lb pull. Also, this was when I made the switch to from S&B to Romanian surplus ammunition and about 1/3 of all the surplus ammo I shot that day (about 30-40 rds) required 2 hits to fire. Fast forward to today, I loaded a magazine with the surplus ammo and after firing the first round I was amazed; the trigger felt lighter or equal to the trigger weight of my XD45. I shot about 50rds today through the CZ-52 and not one of the rounds required a second strike to fire. The new and improved firing pin from Makarov.com killed two birds with one stone (trigger pull & hard primers). I would definitely recommenced replacing the firing pin in your CZ-52 I don’t know why I didn’t do this when I first bought the gun. Pictured below is one of the targets from my session with the CZ-52.
New pin in CZ-52 using Romanian ammo

I also tested the Bulgarian 7.62×54R 183gr ammo I received from AIM Surplus last Friday in my Russian M44. I shot 40 rounds with the bayonet folded and extended to see how much of a difference it made to my shots (picture below). The ammo is clean, went off with only one primer hit, and didn’t even have any sticky bolt. The only thing wring with the ammo is there is a small dent in all the cases near the top where it angles in. This is some great ammo for the price; I should have bought more that two cans cause it won’t be around forever.
Russian M44 using Bulgarian HB bayo folded vs Extended

I also made the switch from Wolf 7.62×39mm to Silver Bear because I have seen videos of FTF and FTE problems with recent batches of Wolf ammo. I shot 60rds though my SAR-1 with no problems other than my sights set to high. All in all I am very pleased with my recent purchases from both AIM and Makarov, and look forward to dealing with both companies again. I am also looking forward to more trigger time. :D

Received CZ-52 parts and lots of ammo.

February 24th, 2007

cz-52 firing pin

I received a package from Makarov.com today containing a new aftermarket firing pin and new hardened rollers for my CZ-52. The new firing pin replaces the brittle pin that came with my CZ-52, this way I don’t have to worry about the tip of the pin breaking off when dry firing the pistol. Another great feature of the pin is it lowers the trigger pull weight to about 3-4lbs, which is the main reason I went with the competition pin vs. a hardened original style pin. I installed the firing pin today with no problems and cleaned out the firing pin channel at the same time with some Q-Tips (it was filthy). One of the original rollers that came with my CZ-52 will not stay in place when the barrel is out of the slide and just falls out, so it can be replaced easily with the new roller. The other roller is still in place and will not come out without drifting out a pin in the barrel and since I do not have the appropriate punch the new rollers will have to wait until I order the required tools from Brownells.

Today I also got an ammo shipment from AIM Surplus. I ordered 600rds of Bulgarian 7.62×54R Heavy Ball 183gr, 380rds 1970’s Romanian 8mm, 288rds 1980’s Romanian 762×25mm, and 500rds Silver Bear 7.62×39mm FMJ which totals to about 90lbs of ammo that the UPS guy had to drag to the door. :) Now I need to take the CZ-52 along with some other guns to the range in the next few days to do some testing.

Side note: I have added a CZ-52 page to the left which has information as well as pictures of the pistol.

Custom Suppressed Mauser

February 4th, 2007

A gentleman by the name “L1A1Rocker” on the Gunsnet Forums has custom made a Mauser with an integral sound suppressor running the entire length of the barrel. Of course, he has done all the necessary paper work with the Nazis BATFE before starting his project.  L1A1 posted 6 threads on the forum with tons of pictures documenting the entire build.  The links to 5 of 6 threads are posted below; sorry I couldn’t find part 1 :( .   He also posted a video of his shooting the mauser which I tried to embed but it didn’t work so I will just have to post a link instead.

The rifle he build is bad ass.  I wish I had the skill to custom machine and build a suppressor for a Mauser, or hell I just wish lived in a state that allows sound suppressors to be owned by private citizens.

Project “Silent Mauser” Part 2
Project “Silent Mauser” Part 3
Project “Silent Mauser” Part 4
Project “Silent Mauser” Part 5
Project “Silent Mauser” Part 6
“Silent Mauser” Video

Took the XD to the shooting range yesterday.

January 23rd, 2007

Before I get into my range story I would like to say that I have finally posted the XD45 information page with the background on the pistol along with a few photos.

I went to the indoor pistol range yesterday and shot my XD45. I usually go to the range every other Monday during the day. I choose this date and time because I theoretically should should have the place all to myself, but this doesn’t always happen. Two weeks ago one of the local news stations was at the range/gun shop doing a story on concealed carry and I got to watch as the news reporter was given a chance to shoot a pistol. Hilarity ensued. Two weeks before the news reporter shooting, the local police were training which can be fun to watch because some LEOs aren’t exactly “gun people”. There is always at least one other person shooting besides me, and on a Monday morning it’s usually an older guy.

Anyways, I show they guy at the counter my membership card, get my targets, and designated lane and head for the range. The front gun shop portion of the building is nice and warm so you would imagine since the range is in the same building it’s going to be warm as well; think again. Just like the past two or three trips the range is freezing. This time they had a portable kerosene heater that resembled the engine off of a V1 buzz bomb at the other end of the range from me. That’s fine cause I’ll have the flames from my XD to keep me warm. :) I load a couple of magazines, put a target out at 15 yards, shoot, and end up with this.
Target1_1-22

Before you ask, I copy my targets with Photoshop for my records so I can see if I am getting any better. This is the same targets that the range uses and I have these in the original sizes also (about 4000×2000). I wouldn’t say this was crap, but I didn’t hit the X at all and there was one shot close to the edge of the 8 ring. I loaded the mags again and shot another target.

Target3_1-22

This time I did do better and destroyed the X, but did have a few flyer’s one hitting the poor SOB in the neck. Something interesting happened when I was shooting this target; the slide locked back prematurely. The last 3 times I have shot my XD the slide has locked back after shooting the tenth round, leaving three more rounds in the magazine. The first time it happened I released the slide and shot the last three assuming that my thumb on my right hand must have ridden up and hit the slide lock button during recoil. This has happened to a few others with an XD and it has always been the shooter unknowingly hitting the button during recoil. The second time it happened two weeks ago I wasn’t so sure it was me causing the problem because it happened on the exact same round (the tenth). I marked the bottom of the magazine so If it happened again and on the same mag there is a good chance the mag is defective(hopefully). Which brings us to yesterday, it happened once again after the tenth round was fired. So, I imediatly drop the mag and check to see if it’s the marked one and it isn’t. I guess it is me locking back the slide prematurely, because I can’t figure out why it’s doing it with both magazines and after the tenth round is fired. Also, why did it just now start locking back early when I have had the gun for months now? Anyway, I shot the last three rounds into the target and record what happened into my log book.

Target5_1-22

This one I am relay not proud of. Sure I hit the X a couple of time, but the group size as a whole is horrendous. One shot wasn’t even in the rigs! I gather myself up and shoot one last target hopping to redeem myself. On a side note this is when the “gangtas” come in to the range with a shortened, pistol gripped shotgun and proceed to shoot a target 10 yards away. I had to stop for a minute or two and watch and they bust a cap in the paper bad guy.
Target6_1-22

This one turned out pretty good, so I ended the day there on a happy note. No bullseye, but a decent grouping. I need to dry fire more, and get my XD a trigger job.

813 rounds through my XD
26.47lbs of bullets fired down range
and the only “problem” is me locking the slide early.

COMPREHENSIVE GUIDE TO GUN SHOWS

January 14th, 2007

gun show ticketsI found this today while looking for local gun show dates only to find out there are no shows close to me.  The closest one is about an hours drive.  All well, it is difficult to find anything at a gun show at a decent price without having to haggle with the guy running the booth like some Middle Eastern bazaar.  I guess I will have to continue to purchase items off the interweb.    I did get some satisfaction and enjoyment out of seeing so many gun-nuts in one place and knowing that I am not alone in my love of firearms, but I digress.    Here is the guide:

COMPREHENSIVE GUIDE TO GUN SHOWS:
************
Gun shows are run by and for dreamers. Every dealer who sets up a table seems to think that the people who attend are half-wits who will happily pay 25% more than manufacturer’s suggested retail price for their goods; and all the attendees hold it as an article of faith that the exhibitors are desperate men who have come in the hopes of finally disposing of their stock at 30% less than wholesale cost. In this environment it helps to have some idea what to expect; so for the benefit of those who are so unfortunate as never to have experienced this distinctively American form of mass entertainment, I offer this guide.

GLOSSARY
The following terms apply to items offered for sale:

MINT CONDITION: In original condition as manufactured, unfired, and preferably in the original box with all manufacturer’s tags, labels, and paperwork.

NEAR-MINT CONDITION: Has had no more than 5,000 rounds fired through it and it still retains at least 60% of the original finish. Surface pitting is no more than 1/8″ deep, and both grip panels are in place. If it is a .22, some of the rifling is still visible.

VERY GOOD: Non-functional when you buy it, but you can probably get it to work if you replace 100% of the parts.

FAIR: Rusted into a solid mass with a shape vaguely reminscent of a firearm.

TIGHT: In revolvers, the cylinder swings out, but you need two hands to close it again. For autoloaders, you must bang the front of the slide on a table to push it back.

REALLY TIGHT: In revolvers you cannot open the cylinder without a lever. Once it’s open the extractor rod gets stuck halfway through its travel. On autoloaders, you need a hammer to close the slide.

A LITTLE LOOSE: In revolvers, the cylinder falls out and the chambers are 1/4″ out of line when locked up. There is no more than 1/2″ of end play. For autoloaders, the barrel falls out when the slide is retracted. If the barrel stays in place, the slide falls off.

GOOD BORE: You can tell it was once rifled and even approximately how many grooves there were.

FAIR BORE: Would be similar to GOOD BORE, if you could see light through it.

NEEDS A LITTLE WORK: May function sometimes if you have a gunsmith replace minor parts, such as the bolt, cylinder, or barrel.

ARSENAL RECONDITIONED: I cleaned it up with a wire wheel and some stuff I bought at K-Mart.

ANTIQUE: I found it in a barn, and I think it dates from before 1960. Note that ANTIQUE guns are usually found in FAIR condition.

RARE VARIANT: No more than 500,000 of this model were ever made, not counting the ones produced before serial numbers were required. RARE VARIANTS command a premium price of 150% of BOOK VALUE.

BOOK VALUE: An irrational number which dealers consider insultingly low and buyers ridiculously high. Since no one pays any attention to it, it doesn’t matter.

IT BELONGED TO MY GRANDFATHER: I bought it at a flea market two weeks ago.

CIVIL WAR RELIC: The vendor’s great-grandfather knew a man whose friend had been in the Civil War.

SHOOTS REAL GOOD: For rifles, this means at 100 yards it will put every shot into a 14″ circle if there isn’t any wind and you’re using a machine rest. For handguns, three out of six rounds will impact a silhouette target at seven yards. In shotguns, it means that the full choke tube throws 60% patterns with holes no bigger than 8″ in them.

ON CONSIGNMENT: The vendor at the show does not own the gun. It belongs to a friend, customer, or business associate, and he has been instructed to sell it, for which he will be paid a commission. He has no authority to discuss price. The price marked is 150% above BOOK VALUE. All used guns offered for sale at gun shows, without exception, are ON CONSIGNMENT, and the dealer is required by his Code of Ethics to tell you this as soon as you ask the price. A BATF study has proven that since 1934 there has never been a single authenticated case of a used gun being offered for sale at a gun show that was actually owned by the dealer showing it.

I’LL LET IT GO FOR WHAT I HAVE IN IT: I’ll settle for what I paid for it plus a 250% profit.

MAKE ME AN OFFER: How dumb are you?

TELL ME HOW MUCH IT’S WORTH TO YOU: I’ll bet you’re even dumber than you look.

PEOPLE YOU WILL MEET AT THE GUN SHOW:

RAMBO: He’s looking for an Ingram MAC-10, and wants to have it custom chambered in .44 Magnum as a back-up gun. For primary carry he wants a Desert Eagle, provided he can get it custom chambered in .50 BMG. He derides the .50 Action Express as a wimp round designed for ladies’ pocket pistols. He has already bought three years’ worth of freeze- dried MRE’s from MARK, as well as seven knives. He is dressed in camoflage BDU’s and a black T-shirt with the 101st AirBorne Division insignia, though he has never been in the Army. He works as a bag boy at Kroger’s.

BUBBA: He needs some money, and has reluctantly decided to sell his Daddy’s .30-30, a Marlin 336 made in 1961. He indignantly refuses all cash offers below his asking price of $475. Unable to sell it, eventually he trades it plus another $175 for a new-in-box H&R Topper in .219 Zipper. He feels pretty good about the deal.

GORDON: He is walking the aisles with a Remington Model 700 ADL in .30-06 on his shoulder. He’s put an Uncle Mike’s cordura sling and a Tasco 3×9 variable scope on it. A small stick protrudes from the barrel, bearing the words, “LIKE NEW ONLY THREE BOXES SHELLS FIRED $800.” This is his third trip to a show with this particular rifle, which he has never actually used, since he lives in a shotgun-only area for deer.

DAWN: She is here with her boyfriend, DARRYL. At the last show, DARRYL bought her a Taurus Model 66 in .357 Magnum. She fired it twice and is afraid of it, but she keeps it in a box on the top shelf of her clothes closet in case someone breaks in. She is dressed in a pair of blue jeans that came out of a spray can, a “Soldier of Fortune” T-shirt two sizes too small, and 4″ high heels. DARRYL is ignoring her, but nobody else is.

DARRYL: He has been engaged to DAWN for three years. He likes shotguns for defense, and he’s frustrated that he can’t get a Street Sweeper, so he’s bought a Mossberg 500 with the 18-1/2″ barrel, a perforated handguard, and a pistol grip. He plans to use it for squirrel hunting when he isn’t sleeping with it. He plans to marry DAWN as soon as he gets a job which pays him enough to take over the payments on her mobile home.

ARNOLD: He is a car salesman in Charlottesville, Virginia. He has a passion for Civil War guns, especially cap-and-ball revolvers. He has a reproduction Remington 1858, and is looking for a real one he can afford. He owns two other guns: a S&W Model 60 and a Sauer & Sohn drilling his father brought home from the war in 1945. He has no idea what caliber the rifle barrel on his drilling is, and he last fired the Model 60 five years ago.

DICK: He is a gun dealer who makes his overhead selling Jennings J- 25’s, Lorcin .380’s, and H&R top-break revolvers. He buys the J-25’s in lots of 1000 direct from the factory at $28.75 each, and sells them for $68.00 to gun show customers. He buys the H&R’s for $10 at estate auctions and asks $85 for them, letting you talk him down to $78 when he is feeling generous. His records are meticulously kept, and he insists on proper ID and a signature on the 4473. He doesn’t care whether the ID and the signature are yours, however. Other than his stock, he owns no guns and he has no interest in them.

ARLENE: She is DICK’s wife. She hates guns and gun shows more than anything in the world. Her husband insists that she accompany him to keep an eye on the table when he’s dickering or has to go to the men’s room. She refuses to come unless she can bring her SONY portable TV, even though she gets lousy reception in the Civic Center and there isn’t any cable. When DICK is away from the table, she has no authority to negotiate, and demands full asking price for everything. She doesn’t know the difference between a rifle and a shotgun, and she doesn’t care, either.

MARK: He doesn’t have an FFL. He buys a table at the show to sell nylon holsters, magazines, T-shirts, bumber stickers, fake Nazi regalia, surplus web gear, MRE’s and accessories. He makes more money than anyone else in the hall.

ALAN: He’s not a dealer, but he had a bunch of odds and ends to dispose of, so he bought a table. On it he displays used loading dies in 7,65 Belgian and .25-20, both in boxes from the original Herter’s company. He also has a half-box of .38-55 cartrdiges, a Western-style gun belt he hasn’t been able to wear since 1978, a used cleaning kit, and a nickel-plated Iver Johnson Premier revolver in .32 S&W. He’s asking $125 for the gun and $40 for each of the die sets. He paid $35 for the table and figures he needs to get at least that much to cover his expenses and the value of his time.

GERALD: He’s a physician specializing in diseases of the rich. He collects Brownings, and specializes in High-Power pistols, Superposed shotguns, and Model 1900’s. He has 98% of the known variations of each of these, and now plans to branch out into the 1906 and 1910 pocket pistols. He owns no handguns made after the Germans left Liege in 1944. He regards Japanese-made “Brownings” as a personal insult and is a little contempuous of Inglis-made High-Powers. He does not hunt or shoot. He buys all his gun accessories from Orvis and Dunn’s.

KEVIN: He is 13, and this is his first gun show. His eyes are bugged out with amazement, and he wonders what his J.C. Higgins single-shot 20-gauge is worth. His father gives him an advance on his allowance do he can buy a used Remington Nylon 66. He’s hooked for life and will end up on the NRA’s Board of Directors.

My first post on the new site.

January 12th, 2007

I am hoping to keep this site updated more regularly than my other site Gonefission.net I will probably post most of the existing content from that site on here, and add some new stuff as well (XD45 and CZ-52). In the mean time if you are board you could always try to beat my scores in the Gun-Nut Arcade. Be sure to register and logged in before you play or else your scores will not be saved.